Vibe FWD L4-2.4L (2009)
-
Verify the cut line was drawn 4 mm (.16 in) from the edge as shown.
1. Place the gauge and draw cut lines onto the tibia pad along the tibia marking gauge.
Side View
Fix Area
Tip Side View
Note
Do not over tighten; the tibia pad may be damaged.
2. Secure the tibia pad in a vise at the contact areas shown.
Note
-
Always wear protective gloves and glasses.
-
Use blades with full lengths of more than 100 mm (3.94 in).
-
Be careful not to contact the blade with the vise.
-
Do not stop during the cutting process.
3. Cut the tibia pad with an air saw until all of the cut line has been cut away.
