Vibe FWD L4-2.4L (2009)
Fuel Line Coupler: Service and Repair
Plastic Collar Quick Connect Fitting Service
Plastic Collar Quick Connect Fitting Service
Removal Procedure
1. Grasp both sides of the quick connect fitting and twist 1/4 turn in each direction in order to loosen any dirt.
Warning
Wear safety glasses when using compressed air in order to prevent eye injury.
2. Remove any dirt, dust, or other foreign material from the quick connect fitting with compressed air.
3. Squeeze the release tabs on the plastic retainer.
Quick Connect Fittings
4. Pull the quick connect fuel fitting apart. Use a shop towel to catch any remaining fuel that may leak from the fuel line and the fitting.
Installation Procedure