Vibe FWD L4-2.4L (2009)
3. Connect the 2 ECM connectors and lower the 2 levers.
4. Install the wire harness clamp (1).
5. Install the air cleaner case.
6. Install the air cleaner cap sub-assembly with hose.
7. Install the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement)
8. Connect cable to battery negative terminal.
9. Perform REGISTRATION (VIN registration) when replacing the ECM. Refer to Control Module References (See: Testing and
Inspection/Programming and Relearning)