Vibe FWD L4-2.4L (2009)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Position Sensor Replacement
Removal Procedure
1. Disconnect the accelerator pedal position sensor connector (1).
2. Remove the 2 bolts (2, 3) and accelerator pedal.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the accelerator pedal assembly with the 2 bolts (2, 3) and tighten to 5.5 Nm (49 lb in).
2. Install the accelerator pedal assembly connector (1).
