Vibe FWD L4-2.4L (2009)
Vehicle Speed Sensor: Service and Repair
MVA 4 Speed - Automatic Transmission
Vehicle Speed Sensor Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).
2. Remove the air cleaner cap sub-assembly.
3. Remove the air cleaner case.
4. Disconnect the speed sensor connector (2).
5. Remove the bolt and speed sensor (1).
6. Remove the O-ring from the speed sensor.
