Vibe FWD L4-2.4L (2009)
Communications Control Module: Service and Repair
Communication Interface Module Replacement
Communication Interface Module Replacement
Removal Procedure
Note: The vehicle communication interface module (VCIM) has a specific set of unique numbers that tie the module to each vehicle. These
numbers, the 10-digit station identification and the 11-digit electronic serial number, are used by the National Cellular Network and OnStar(R) to
identify the specific vehicle. Because these numbers are tied to the vehicle identification number of the vehicle, you must never exchange these
parts with those of another vehicle.
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
1. Disconnect the battery ground cable.
2. Remove the front seat. Refer to Front Seat Replacement - Bucket (See: Body and Frame/Seats/Service and Repair/Front Seat Replacement -
Bucket).
3. Remove the two clips (1).
4. Disengage two guides (2) and remove the communication interface module cover (3).
