Vibe FWD L4-2.4L (2009)
Radiator Cooling Fan Control Module: Service and Repair
Fan Control Module Replacement
Removal Procedure
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Disconnect the cooling fan control module connectors (3).
3. Remove the two screws (2).
4. Remove the cooling fan control module (1).
Installation Procedure
1. Install the cooling fan control module (1) with two screws (2).