Vibe FWD L4-2.4L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the rear seat belt retractor (2) to the vehicle. Secure the retractor with the upper mounting bolt (1) and the lower mounting bolt (3).
*
Tighten the rear seat belt retractor upper mounting bolt to 5 Nm (43 lb in).
*
Tighten the rear seat belt retractor lower mounting bolt to 41 Nm (30 lb ft).
2. Install the rear seat belt lower anchor bolt (1).
Tighten the rear seat belt lower anchor bolt to 41 Nm (30 lb ft).