Vibe FWD L4-2.4L (2009)
1. Install the front end sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the front end sensor - fastener (2).
Tighten the fasteners to 9 Nm (80 lb in).
3. Install the front end sensor electrical connector (1).
4. Install the front fascia. Refer to Front Bumper Fascia Replacement (Without GT) (See: Body and Frame/Bumper/Front Bumper/Front Bumper
Cover / Fascia/Service and Repair/Front Bumper Fascia Replacement (Without GT))Front Bumper Fascia Replacement (With GT) (See: Body
and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia Replacement (With GT)).
5. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag Systems/Air Bag(s) Arming and Disarming/Service and Repair).
