Vibe FWD L4-2.4L (2009)
Seat Occupant Sensor: Service and Repair
Inflatable Restraint Passenger Presence System Replacement - Front (Module)
Inflatable Restraint Passenger Presence System Replacement - Front (Module)
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag Systems/Air Bag(s) Arming and Disarming/Service and Repair).
2. Remove the right front seat. Refer to Front Seat Replacement - Bucket (See: Body and Frame/Seats/Service and Repair/Front Seat Replacement -
Bucket).
3. Disconnect the electrical connector from the passenger presence system (PPS) module (1).
4. Remove the 2 PPS module screws (2).
5. Remove the PPS module (3).
Installation Procedure