Vibe FWD L4-2.4L (2009)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor Replacement
Front Wheel Speed Sensor Replacement
Removal Procedure
1. Remove the wheelhousing. Refer to Wheelhouse Panel Replacement (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and
Repair).
Note: The wheel speed sensor is serviceable only as an assembly. Do NOT attempt to service the sensor harness pigtail.
2. Disconnect the wheel speed sensor electrical connector (1).
3. Remove the bolt (1) retaining the wheel speed sensor pigtail harness.
