Vibe FWD L4-2.4L (2009)
5. Position the wheel speed sensor pigtail harness. Secure with bolt (1).
Tighten the harness bolt to 8 Nm (71 lb in).
6. Connect the wheel speed sensor electrical connector (1).
7. Install the wheelhousing. Refer to Wheelhouse Panel Replacement (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and
Repair).
8. Perform Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System Check -
Vehicle).