Vibe FWD L4-2.4L (2009)
Cruise Control Switch: Service and Repair
Cruise Control Release Switch Replacement
Cruise Control Release Switch Replacement
Removal Procedure
1. Disconnect the cruise control release switch electrical connector (1).
2. Loosen the cruise control release switch locknut (3) and disengage the pin (2).
3. Remove the locknut and the cruise control release switch (4) from the clutch pedal bracket.
Installation Procedure
1. Install the cruise control release switch (4) with the locknut (3) to the clutch pedal bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution)