Vibe FWD L4-2.4L (2009)
4. Install the starter assembly and wire harness clamp bracket with the 2 bolts (1, 2).
Tighten the bolts to 37 Nm (27 lb ft).
5. Connect the wire harness to terminal 30 and install the nut (1). Then, attach the terminal cap.
Tighten the nut to 9.8 Nm (87 lb in).
6. Connect the terminal 50 connector (2) to the starter assembly.
7. Install the battery carrier. Refer to Battery Tray Replacement (See: Battery/Battery Tray/Service and Repair).
8. Install the battery. Refer to Battery Replacement (See: Battery/Service and Repair).
