Vibe FWD L4-2.4L (2009)
Note: DO NOT tighten the nut and bolts completely. The weight of the vehicle must be on the tire and wheel assemblies before tightening the nut
and the bolts.
3. Install the following components to the crossmember:
*
The left lower control arm (2)
*
The 2 bolts (1, 4)
*
The nut (3)
Note: DO NOT tighten the nut and bolts completely. The weight of the vehicle must be on the tire and wheel assemblies before tightening the nut
and the bolts.
4. Install the following components to the crossmember:
*
The right lower control arm
*
The 2 bolts
*
The nut
Note: DO NOT tighten the nut and bolts completely. The weight of the vehicle must be on the tire and wheel assemblies before tightening the nut
and the bolts.
5. Install the trans support and the 2 bolts to the crossmember.
6. Use a jack in order to raise and support the crossmember with the attached components as a unit.
7. Install the front suspension dynamic damper (1).