pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Rear Cross-Member|Service and Repair|Page 6779 > < Rear Cross-Member|Service and Repair|Page 6777
Page 4
background image

3. Raise and install the rear suspension support crossmember using a jack and a block of wood.
4. Install the 2 nuts (3, 4) and the 2 bolts (1, 2) in order to retain the crossmember to the body. Tighten the nuts and the bolts to 105 Nm (77.4 lb ft).
5. Install the evaporative emission canister. Refer to Evaporative Emission Canister Replacement   (See: Powertrain Management/Emission Control

Systems/Evaporative Emissions System/Evaporative Emission Control Canister/Service and Repair) or Evaporative Emission Canister
Replacement   (See: Powertrain Management/Emission Control Systems/Evaporative Emissions System/Evaporative Emission Control
Canister/Service and Repair).

Note:  Do not tighten the nuts or the bolts on the suspension components. The weight of the vehicle must be on the tire and wheel assemblies
before tightening the nuts and the bolts.

6. Install the rear shock absorbers with the coil springs and temporarily tighten. Refer to Shock Absorber Replacement (All Wheel Drive and GT)   (

See: Suspension Strut / Shock Absorber/Service and Repair/Rear Suspension Shock Absorber/Shock Absorber Replacement)Shock Absorber
Replacement (Except All Wheel Drive and GT)   (See: Suspension Strut / Shock Absorber/Service and Repair/Rear Suspension Shock
Absorber/Shock Absorber Replacement).

7. Install the rear hub and bearing assembly. Refer to Rear Wheel Bearing and Hub Replacement (All Wheel Drive)   (See: Wheel Hub/Service and

Repair)Rear Wheel Bearing and Hub Replacement (GT)   (See: Wheel Hub/Service and Repair)Rear Wheel Bearing and Hub Replacement
(Except All Wheel Drive and GT)   (See: Wheel Hub/Service and Repair).

8. If you are replacing a control arm, copy the match marks from the old components to the new components.
9. Install the upper control arms, and temporarily tighten. Refer to Upper Control Arm Replacement (All Wheel Drive and GT)   (See: Control

Arm/Service and Repair).

10. Install the lower control arms, and temporarily tighten. Refer to Lower Control Arm Replacement (All Wheel Drive and GT)   (See: Control

Arm/Service and Repair).

11. Install the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement (All Wheel Drive and GT)   (See: Stabilizer Bar/Stabilizer Link/Service

and Repair).

12. Install the park brake assembly. Refer to Park Brake Hardware Replacement (All Wheel Drive and GT)   (See: Brakes and Traction

Control/Parking Brake System).

13. Install the front park brake cable. Refer to Parking Brake Front Cable Replacement   (See: Brakes and Traction Control/Parking Brake

System/Parking Brake Cable/Service and Repair/Removal and Replacement).

14. Install the rear park brake cables. Refer to Parking Brake Rear Cable Replacement (All Wheel Drive)   (See: Brakes and Traction Control/Parking

Brake System/Parking Brake Cable/Service and Repair/Removal and Replacement)Parking Brake Rear Cable Replacement (GT)   (See: Brakes
and Traction Control/Parking Brake System/Parking Brake Cable/Service and Repair/Removal and Replacement)Parking Brake Rear Cable
Replacement (Except All Wheel Drive and GT)   (See: Brakes and Traction Control/Parking Brake System/Parking Brake Cable/Service and
Repair/Removal and Replacement).

15. Install the 2 rear wheel speed sensors and pigtails. Refer to Rear Wheel Speed Sensor Replacement (FWD)   (See: Brakes and Traction

Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair)Rear Wheel Speed Sensor Replacement (AWD)   (
See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair).

16. Install the rear brake rotors. Refer to Rear Brake Rotor Replacement   (See: Brakes and Traction Control/Disc Brake System/Brake

Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement).

17. Install the rear brake calipers. Refer to Rear Brake Caliper Replacement (All Wheel Drive and GT)   (See: Brakes and Traction Control/Disc

Brake System/Brake Caliper/Service and Repair/Removal and Replacement/Rear Brake Caliper Replacement)Rear Brake Caliper Replacement
(Except All Wheel Drive and GT)   (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and

Rear Cross-Member|Service and Repair|Page 6779 > < Rear Cross-Member|Service and Repair|Page 6777