Vibe FWD L4-2.4L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the rear wheel bearing and hub assembly with the 4 bolts (1, 2, 3, 4). Tighten the bolts to 100 Nm (74 lb ft).
2. Connect the rear wheel speed sensor connector.
3. Install the rear brake rotor. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement).
Rear Wheel Bearing and Hub Replacement (GT)
Rear Wheel Bearing and Hub Replacement (GT)
Removal Procedure
1. Remove the rear brake rotor. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement).
2. Disconnect the rear wheel speed sensor connector from the sensor.
Position the sensor harness to the side.
3. Use mechanics wire in order to support the park brake assembly.
