Vibe FWD L4-2.4L (2009)
washer, and nut.
Note: Ensure there is no oil, water, or lubricant on any sensor components.
2. Remove any tire sealant or foreign matter from the sensor components.
Note: Ensure there is no oil, water, or lubricant around the rim hole.
3. Remove any tire sealant or foreign matter from the wheel.
Disposal Procedure
Note: The tire pressure indicator sensor has a lithium battery.
1. Use a flat-blade tool in order to pry off the back cover.
2. Cut the 2 terminals (2,3) that connect the battery (1) to the base board. The battery and the base board are covered in silicone.