Vibe FWD L4-2.4L (2009)
4. Remove the 4 bolts (1, 2, 3, 4) and the rear wheel bearing and hub assembly.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the rear wheel bearing and hub assembly with the 4 bolts (1, 2, 3, 4) and tighten to 56 Nm (41 lb ft).
2. Remove the mechanics wire.
3. Connect the the rear wheel speed sensor connector.
4. Install the rear brake rotor. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement).