Vibe FWD L4-2.4L (2009)
Wheel Fastener: Service and Repair
Front Suspension
Wheel Stud Replacement
Special Tools
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Service and Repair).
3. Remove the front brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement).
4. Remove the front brake shield. Refer to Front Brake Shield Replacement (See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Front Brake Shield Replacement).
5. Install 2 wheel nuts onto 2 wheel studs.
6. Use a pry bar on the 2 nuts in order to prevent the hub from turning.
7. Using the remover J 43631 (1) , press out the wheel stud from the hub.
Installation Procedure