Vibe FWD L4-2.4L (2009)
21. Remove the bolts (4, 6) and No. 3 solenoid lock plate from the valve body.
22. Pull out the shift solenoid valve ST from the valve body.
23. Remove the No. 1 solenoid lock plate from the shift solenoid valve SLT.
24. Pull out the shift solenoid valve SLT from the valve body.
Installation Procedure
1. Install the shift solenoid valve SLT to the valve body.
2. Install the No. 1 solenoid lock plate to the shift solenoid valve SLT.
3. Install the shift solenoid valve ST to the valve body.
4. Install the No. 3 solenoid lock plate to the valve body with the bolts (4, 6) and tighten to 11 Nm (97 lb in).
