Vibe FWD L4-2.4L (2009)
16. Install the transmission wire. Refer to Control Valve Body and Wiring Harness Removal (See: Service and Repair/Overhaul)
17. Coat the O-ring with ATF WS.
18. Install the ATF temperature sensor with the lock plate and bolt and tighten to 7 Nm (62 lb in).
19. Connect the shift solenoid valve connectors (1-7).
20. Install the automatic transaxle oil pan assembly.
21. Connect the negative battery cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
22. Install the engine splash shield. Refer to Engine Splash Shield Replacement - Left Side (See: Body and Frame/Splash Guard/Service and
Repair/Engine Splash Shield Replacement - Left Side).
23. Add automatic transaxle fluid.
24. Inspect the transaxle fluid level.
