Vibe FWD L4-2.4L (2009)
Fluid - Differential: Service and Repair
Axle Lubricant Change
Removal Procedure
1. Using a hexagon wrench (10 mm), remove the differential cover plug (1) and gasket.
2. Using a hexagon wrench (10 mm), remove the differential drain plug and gasket, then drain the oil.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Using a hexagon wrench (10 mm), install the differential drain plug with a new gasket and tighten to 39 Nm (29 lb ft).
2. Add oil.
3. Check the oil level.
