Vibe FWD L4-2.4L (2009)
Wheel Bearing: Service and Repair
Rear Suspension
Rear Wheel Bearing and Hub Replacement
Rear Wheel Bearing and Hub Replacement (Except All Wheel Drive and GT)
Removal Procedure
1. Remove the rear brake rotor. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement).
2. Disconnect the rear wheel speed sensor electrical connector from the sensor.
Position the sensor harness to the side.
3. Remove the 4 bolts (1, 2, 3, 4) and the rear wheel bearing and hub assembly.
Installation Procedure