Vibe FWD L4-2.4L (2009)
13. Install the No. 1 front floor heat insulator with the nuts (1-3) and tighten to 6 Nm (53 lb in).
14. Install the front exhaust pipe assembly. Refer to Front Pipe Replacement (2.4L AWD) (See: Engine, Cooling and Exhaust/Exhaust
System/Exhaust Pipe/Service and Repair)Front Pipe Replacement (2.4L FWD) (See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair).
15. Install the air cleaner assembly.
16. Install the engine cover assembly. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine Cover Replacement).
17. Inspect for an exhaust gas leak.