911 Carrera (997) F6-3.6L (2006)
Central Control Module: Service and Repair
Removing And Installing Gateway Control Unit
Tools
Preliminary work
Preliminary work for gateway control unit
Remove wiper linkage.
If the control unit is being replaced, read out the values from the control unit before removal.
General warning notes
General warnings for gateway control module
WARNING:
Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
-
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
Removing gateway control unit
INFORMATION: The gateway control unit is located underneath the plenum panel.
1. Switch off ignition and remove ignition key.