911 Carrera (997) F6-3.6L (2006)
4.1.1
Loosen adjusting screws --> Figure 7.
4.1.2
Adjust installation position (horizontal) by moving the adjusting screws.
4.1.3
Tighten adjusting screws.
4.2
ONLY for USA vehicles:
4.2.1
Clip in speed nuts --> Figure 8-E-.
4.2.2
Clip insert mounting --> Figure 9-D- into CD autochanger retaining frame.
4.2.3
Insert CD autochanger into CD autochanger retaining frame and tighten fastening screws --> Figure 9 -G-.
Tightening torque 2.5 Nm (2.0 ftlb.)
NOTE: Ensure that the insert mounting is seated correctly in the front panel.
4.2.4
Guide CD autochanger retaining frame with insert mountings --> Figure 10-B- into the front panel from above --> Figure 10-Lupe- and swivel
it downwards.