911 Carrera (997) F6-3.6L (2006)
Front Bumper Cover / Fascia: Removal and Replacement
631719 Removing And Installing Front Retaining Strip
Preliminary work
1. Remove the front apron.
NOTE: Only open for vehicles with garage door function.
2. Remove control unit for garage door opener.
NOTE: Only for USA/Canada version vehicles.
3. Remove servo motor for emergency release.
Removing front retaining strip
Overview, front retaining strip
Removing front retaining strip
1. Unscrew fastening nuts -2- and remove front retaining strip -1-.
Installing front retaining strip
Installing front retaining strip
1. Position front retaining strip -1- on the body and tighten down slightly with the fastening nuts -2-.