911 Carrera (997) F6-3.6L (2006)
Installation position of front window shaft seal
NOTE: Dirty door window glass installed.
-
Risk of irreparable damage to front window channel seal.
-
During installation, make sure that no lubricant from the window guides gets on the door window glass.
-
Clean the door window glass and check that the front window channel seal is clean.
-
Replace damaged window channel seal.
NOTE: Make sure horizontal alignment is correct (Arrows C, D).
Installing the front window shaft seal
1. Attach front window shaft seal -1- starting at the front end -arrow A- to the sheet metal door flange -2- from above -arrow B-.
Closing the front door window
2. Close the front door window -1- fully.