911 Carrera (997) F6-3.6L (2006)
Front Door Window Regulator: Service and Repair
Removing and Installing Door Unit Carrier
Removing And Installing Door Unit Carrier
Technical values
Preliminary work
1. Disconnect electric lead for door. Refer to Removing and installing wiring harness for door.
2. Remove door trim panel. Refer to Removing and installing door trim panel.
3. Remove power window motor. Refer to Removing and installing power window motor.
4. Remove head airbag. Refer to Removing and installing head airbag.
Removing door unit carrier
Covering door with adhesive tape
INFORMATION: Adhesive tape protects the door from paint damage when removing the door unit carrier.
1. Cover door in marked area with adhesive tape.
Removing seal for mirror triangle
1. Pull out seal for mirror triangle from cable cutout opening for door mirror.