911 Carrera (997) F6-3.6L (2006)
CAUTION: Incorrect handling of gas-filled shock absorbers.
-
Gas-filled shock absorbers can burst.
-
Risk of eye injuries.
-
Risk of bruising.
-
Gas-filled shock absorbers must be in idle state before removal.
-
Open the lid.
-
Secure the lid to prevent it from closing accidentally following removal of the gas-filled shock absorbers.
-
Do not use force to open the gas-filled shock absorbers because of their high internal pressure.
1. Open the rear lid.
2. A second person should hold the rear lid to prevent it from closing accidentally.
3. Insert a screwdriver -2- between the head of the pneumatic spring and the safety clip -3- -A-.
4. Release the safety clip -3- by levering the screwdriver -2- towards the pneumatic spring -B-. The safety clip remains in the head of the pneumatic
spring.
5. Pull the pneumatic spring -1- from the ball head -C-.
6. Withdraw the screwdriver.
7. Remove pneumatic spring -1-.
Installing rear pneumatic spring
Installing rear pneumatic spring on the body