911 Carrera (997) F6-3.6L (2006)
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for rear underbody -4-.
2. Tighten fastening screws -2-. Tightening torque: Tightening torque: 2 Nm (1.5 ftlb.)
3. Tighten fastening nuts -3-. Tightening torque: Tightening torque: 2.5 Nm (2.0 ftlb.)
Installing cover for rear underbody - rear section