911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1045002.png)
Installing rear wheel housing liner
1. Insert wheel housing liner -A-.
2. Screw in fastening screws -1- and tighten them to the specified tightening torque.
Final tightening: 2 Nm (1.5 ftlb.).
3. Screw on fastening nuts -2- and tighten them to the specified tightening torque.
Final tightening: 1.5 Nm (1.0 ftlb.).
Subsequent work
Reworking
Install wheel.
