911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1046007.png)
Preparing connection areas of the body for installing the front panel
Safety instructions for dealing with flying sparks during grinding and welding work
WARNING: Grinding and welding work.
-
Danger of fire or explosion.
-
Avoid working in an area with highly inflammable or explosive materials.
-
Cover highly inflammable or explosive areas.
-
Remove highly inflammable or explosive parts.
Preparing connection areas of the body for installing the front panel
1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked area -A- using a hot-air gun or rotary brush. Grind
the connecting flanges until bare.
2. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked area -A- using a hot-air gun or rotary brush. Grind
the connecting flanges until bare.
3. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked area -A- using a hot-air gun or rotary brush. Grind
the connecting flanges until bare.
