911 Carrera (997) F6-3.6L (2006)
Installing front-axle threaded joint
-> Tightening torque, M12: 100 Nm (74 ftlb.)
Stud on transmission support
1.3.
Screw in and tighten stud -3- on transmission support -1-
-> Tightening torque: 20 Nm (15 ftlb.)
1.4.
Screw on and tighten nuts -2- on transmission support -1-
-> Tightening torque: 65 Nm (48 ftlb.)
2. Tighten spring struts at the spring-strut dome.
2.1.
Secure spring struts at the spring-strut dome by screwing on and tightening the nuts -2-.
Removing and installing spring struts for front axle
-> Tightening torque: 33 Nm (24 ftlb.)