911 Carrera (997) F6-3.6L (2006)
Headliner: Service and Repair
Removing and Installing Roof Lining
708419 Removing And Installing Roof Lining
Preliminary work
1. Remove A-pillar trim panel.
2. Remove C-pillar trim.
3. Remove and install sliding roof panel.
Removing roof lining
Removing cover for motor for sliding roof
1. Switch off ignition and remove ignition key.
Unclipping cover for fastening screws
2. Using a small screwdriver, carefully unclip and remove the cover for the fastening screws at the openings -arrows- provided.
Unclipping cover for motor for sliding roof
3. Unscrew the two fastening screws.
4. Unclip cover for motor for sliding roof at the rear to the left and right -arrows A- and push it out to the front towards the windscreen -arrow B-.
Removing connectors at sliding roof switch and interior light
5. Release connecters at sliding roof switch and at the interior light -arrows a- and remove them. Remove cover for motor for sliding roof.
Disconnecting electric plug connection