911 Carrera (997) F6-3.6L (2006)
Removing mounting saddle and pivot bearing
1. Unclip cap on the mounting saddle -1- with a screwdriver and open -arrow A-.
2. Unscrew fastening screw -2- and remove mounting saddle -3- -arrow B-.
3. Carefully insert a screwdriver between headliner and pivot bearing and release cover -4- -arrow C-.
4. Unscrew fastening screw -5- and remove pivot bearing -6- -arrow D-.
Removing headliner
Installation position for headliner
Undoing headliner at the front
1. Unscrew fastening screws -1- at the front in the headliner -2- and unclip the headliner from the cowl panel frame -3- in a downward direction at the
left and right.