911 Carrera (997) F6-3.6L (2006)
1.6
Pull back carpet lining and loosen locating peg => Figure 3-1 - and fastening screws => Figure 3-2 on the support (wiring duct).
2.
Route electric wire harness (=> Figure 2-B-).
2.1
Insert wire harness into the wiring duct => Figure 4 -A- and position inverter => Figure 4-B- in the first cut-out of the wiring duct.
3.
Disconnect plug connection for door wire harness.
3.1
Driver's side:
3.1.1 Clip plug connection => Figure 5 -arrow- out of bracket and side protective hose over the plug connection.