porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 5803 > < Procedures|Page 5801
Page 12
background image

Removing collar of opening for belt

1. Release rear backrest and fold it forward.
2. Pull collar of opening for belt -1- up and off.

Undoing side trim panel

3. Unscrew fastening screw -1- from the side trim panel -2-.

Removing side trim panel

4. Unscrew locking pins -1-, remove stop -2-.
5. Pull side trim panel locking tabs -3- out of the clamp in the rear side panel. Lift side trim panel locking tabs on lower side member and guide them

out.

ATTENTION: 
Voltage peaks may cause damage to the audio system.

-

Before unplugging/removing audio components, remove ignition key and switch off audio system.

6. Disconnect electric plug connection -1- on loudspeaker -2- and remove side trim panel -3-.

Disconnecting loudspeaker

Installing side-panel lining at rear

Procedures|Page 5803 > < Procedures|Page 5801