911 Carrera (997) F6-3.6L (2006)
4. Insert tool box -2- into the guide pins in the luggage compartment floor, close the tool box and lock the twist locks -1-.
NOTE: Only for USA/Canada version vehicles.
5. Install front emergency release.
Removing and Installing Cover For Front Lock Mount
703919 Removing And Installing Cover For Lock Mount
Removing cover for lock mount
Removing cover for lock support
1. Open front lid.
2. Loosen cover for lock support -1- at the Velcro fasteners -2-.
Loosening Trim Panel
3. Actuate lid-release lever -3- in -direction of arrow A- and remove cover for lock support -1- (-arrow B-).
4. Lift cover for lock support up slightly -1-, release the locking tab at the side from below -arrow A- and pull it out of the cover for the wing flange
-2- (-arrows B-).