911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1093002.png)
3. Remove holder for transverse strut -1- on sliding roof frame -2-.
4. Remove fastening nuts -1- from sliding roof frame -2-, inspect them and replace if necessary.
Converting frame for sliding roof
1. Installing washers (6x).
1.1. Affix washers -1- left and right at the fastening points of the sliding roof frame with Loctite 424.
INFORMATION: For sliding roof frames converted for the new air deflector, the short spacer sleeves must be replaced by the long spacer sleeves.
2. Remove short spacer sleeves (4x).
