911 Carrera (997) F6-3.6L (2006)
Sunroof / Moonroof Motor: Service and Repair
Removing And Installing Motor For Sliding Roof
Technical values
Removing motor for sliding roof
Removing cover for motor for sliding roof
1. Switch off ignition and remove ignition key.
2. Using a small screwdriver, carefully unclip and remove the cover for the fastening screws at the openings -arrows- provided.
3. Unscrew the two fastening screws.
4. Unclip cover for motor for sliding roof at the rear to the left and right -arrows A- and push it out to the front towards the windscreen -arrow B-.
5. Release connecters at sliding roof switch and at the interior light -arrows a- and remove them. Remove cover for motor for sliding roof.