porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Sunroof / Moonroof Motor|Service and Repair|Page 5949 > < Sunroof / Moonroof Motor|Service and Repair|Page 5947
Page 5
background image

3. Insert cover of fastening screws into the mounts on the sunroof motor cover -arrows- and clip it in.

4. Switch on ignition and check that sunroof switch and interior light are working.

Information

Emergency operation on motor for sliding roof

INFORMATION:

-

The hexagon-socket wrench needed for emergency operation is clipped onto the back of the motor for the sliding roof.

-

The motor for the sliding roof can also be operated manually if the electric drive fails. Before using the emergency operation mechanism, check
the fuse in the fuse box at the A-pillar.

-

The end positions of the motor for the sliding roof must be stored again following emergency operation.

1. Removing cover on motor for sliding roof.
2. Insert a hexagon-socket wrench into the drive axle of the motor for the sliding roof, press it in and actuate the sliding roof motor manually.

Storing end positions of motor for sliding roof

INFORMATION:  If the sunroof was closed using the emergency operation mechanism, or if the motor for the sliding roof was replaced when the
sunroof was open, the end positions of the motor for the sliding roof must be re-taught.

1. Press the open switch for the sliding roof motor.

1.1. The sunroof starts to move.
1.2. Press this switch as often as required until the sunroof is at the rear end position and no longer responds when you press the open switch. The

Sunroof / Moonroof Motor|Service and Repair|Page 5949 > < Sunroof / Moonroof Motor|Service and Repair|Page 5947