911 Carrera (997) F6-3.6L (2006)
1.5. Fold spoiler drive -2- down out of the rear lid -3- (-arrows-).
2. Rework the spoiler drive.
2.1. Thoroughly clean the spoiler drive -1- in the marked area -A- with isopropanol.
2.2. Pull off backing sheet and stick strips of adhesive tape -2- over the bores on the spoiler drive -1-.
3. Install filler piece.
INFORMATION: Only for USA vehicles without microswitch.
3.1. Slide the filler piece -1- as far as it will go into the spoiler drive -2- (-arrow-).
4. Install the spoiler drive.
4.1. Fold the spoiler drive -2- up -arrows- and position it on the rear lid -3-.