911 Carrera (997) F6-3.6L (2006)
Adjusting parking brake
6. Fit the brake caliper. Replace the brake caliper fastening screws each time they are removed. Observe specified tightening torque.
7. Position disc brake pads by operating the brake several times.
8. Check brake fluid level and correct if necessary. The brake fluid level must be between the MAX-MIN marking.
Brake system: checking fluid level
Bedding in the brake pads
New brake pads must be worn in (bedding-in period). Their optimum braking effect is therefore not reached until after a few hundred kilometers. The
slightly reduced braking effect must be compensated for by increased pressure on the brake pedal.
The same also applies after changing the brake disc.
Subsequent work
Install wheel.
Rear With PCCB
Removing and installing rear PCCB brake disc