911 Carrera (997) F6-3.6L (2006)
Radiator: Procedures
Removing
Removing and installing radiator
Preliminary work
Preliminary work for removing radiator
Removing and installing front wheel housing liner. Removing and installing front apron.
1. Remove air guides in front of radiator.
Note: The air-conditioning condenser remains in the vehicle. The air-conditioning system is not opened.
2. Detach air-conditioning condenser from side radiator and allow it to hang freely. To do this, remove hexagon-head sheet metal screw between
air-conditioning condenser and side radiator and pull air-conditioning condenser out of side brackets.
Removing radiator
1. Remove the vent line at the top of the side radiator. To do this, press the lock and pull the line off the support -1-. Pull the vent line out of the
holder -2-.
2. Remove cable plug from fan motor -arrow-. To do this, press cable plug together (relieve plug), open the release and disconnect the cable plug.