911 Carrera (997) F6-3.6L (2006)
Engine carrier
Removing coolant pump
Warning
Coolant is hazardous to health.
^
Risk of skin irritation.
-> Wear protective gloves and goggles.
-> In the event of contact with the skin or eyes, wash immediately with plenty of water.
1. Unscrew seven fastening screws (two M6 x 30 -2-, five M6 x 25 -1-) to coolant pump, remove pump.
Screw arrangement for coolant pump
2. Cut through seal webs -arrows- in the combination seal, remove old seal.
Connection points for coolant pump combination seal
Installing coolant pump
1. Clean sealing face of coolant pump with solvent naphtha or acetone, remove with emery cloth if necessary and then degrease.
2. Clean sealing face on crankcase with solvent naphtha or acetone. Remove any residues beforehand with an emery cloth.