911 Carrera (997) F6-3.6L (2006)
4. Remove support for rear muffler. Disconnect cable plugs of ignition coils and magnetic hydraulic valves. Unscrew four Torx screws: intake side
two M8 30, exhaust side two M8 25, remove support.
5. For disassembling cylinder bank -6, undo the ground cable on the cylinder head by unscrewing a Torx screw M8 and removing the cable.
Disconnect two cable plugs from oil pressure switch.
6. Remove ignition coils -1-. In each case unscrew two Torx socket screws M6 25 and pull the ignition coils out of the spark-plug recess.
7. Remove solenoid hydraulic valves-2- (NVS und VHS).
8. Remove spark plugs.
9. Remove oil suction pump for cylinders 1 - 3. Unscrew four Torx screws M6 20 (micro-self-locking), remove oil suction pump, and replace O-ring
and screws.