911 Carrera (997) F6-3.6L (2006)
5. Unscrew the front fastening screw -arrow- of the air-conditioning compressor. Due to the restricted accessibility, the use of a 3/8 inch extension,
16 inch movable NR.15 with a long Torx E10 socket wrench is recommended. To lift out the air-conditioning compressor, the screw must be
pulled upwards and held in position.
6. Lift out the air-conditioning compressor with the leads connected and lay to one side on a protective support. Secure additionally with a tie-wrap.
7. Pull the sheetmetal holder between the servo oil lines out of the rubber mounts and remove -arrow-.
8. Remove plastic line between oil mist separator and oil flange and lay to one side.
9. Unscrew the two fastening screws of the oil flange behind the servo oil lines and remove the oil flange -arrows-. Replace seal.
10. Remove fastening screws for fuel distributor pipe -1- and pull fuel distributor pipe together with fitted injection valves from the intake distributor.
Check sealing rings of injection valves and replace if necessary.