911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-327003.png)
1. Position oil-pressure sender with new sealing ring on cylinder head cover, side 4-6.
Information
The sender is removed from and fitted onto the underside of the engine, therefore the direction of rotation must be observed.
^
Undo: in a clockwise direction.
^
Tighten: in an anticlockwise direction.
2. Tighten sender using the specified tools. -> Tightening torque: 30 Nm (22 ftlb.).
Tool usage - oil-pressure sender
3. Fit cover plate, tighten two M6 Torx screws. -> Tightening torque: 10 Nm (7.5 ftlb.)
4. Insert cable plug in engine compartment.
